PVC Conduit Pipe Fittings Manufacturers in Africa | PVC Conduit Pipes & Accessories Suppliers in Africa | PVC Electrical Conduit Pipes Suppliers in Africa

As mentioned earlier, Quality has always been our priority. Our products are certified as per IS: 9537 (Part III) Standards. In order to assure best quality, all the tests are conducted in house as per the Bureau Of Indian Standards (BIS), on a regular basis. The following tests are conducted by our qualified engineers, in a well equipped and certified Laboratory:

Marking Test	Marking parameters like manufacturer's name, nominal sizes, country of manufacture, strength & standard mark are tested under this. Also a test for durability of marking is conducted.
Dimension Test	The attributes tested in this are Maximum and Minimum Outside and Inside Diameter, Length of conduit and uniformity of wall thickness.
Construction Test	The requirements specified under this test are that the inside and outside surface of conduit are reasonably smooth and free from burrs, flash and similar defects; and the edges over which the conductors or cables are likely to drawn does not damage the cable or conductor.
Mechanical Property	The tests conducted for mechanical properties are the bending test, compression test (during and after the load), Impact test and Collapse test.
Resistance to Heat	The diameter of impression should not exceed 2mm.
Resistance to Burning	Flame of the sample should have died out in less than 30 seconds after removal of the burner.
Electrical Characteristics Test	Electrical strength and Insulation Resistance are tested under this step.

Testing and Quality Assurance